Foss
Mill CM 290 Cemotec™ - Sample preparation for moisture analysis
The CM 290 Cemotec™ is specially designed to grind grain and seed samples without losing moisture Content. The mill works on the principle of shearing between two discs, one stationary and one turning. The sample is introduced at the centre of the stationary disc and is crushed between the discs. The distance between the discs is easily adjusted by a graduated knob to control the fineness of the grist.
Specifications
| Sample: | Cereals, feed, legumes, fertilizer |
| Sample typ: | dry (up to 15 % moisture and 10 % fat) |
| Sample size: | up to 14 mm Ø |
| Grinding rate/s: | appr. 3 g |
| Grinding speed: | Grinding disc 3.000 rpm |
Mill CT 293 Cyclotec™ - Sample preparation for the NIR analysis
The CT 293 Cyclotec™ offers a very rapid and convenient sample preparation in a variety of analytical techniques such as Kjeldahl, infrared reflectance, direct distillation, crude fibre and extraction. It is an excellent mill for all types of sample preparation where the requirements for fineness and uniformity of particle size are high. The mill grinds samples by a high speed action, rolling the sample against the inner circumference of a durable grinding surface and then passes it through a fine mesh screen. The high volume air flow provides self cleaning, action, enabling whole series of samples to be ground with minimal cross contamination.
Specifications
| Sample: | Cereals, feed, legumes, parts of plants |
| Sample typ: | dry (up to 15 % moisture and 10 % fat) |
| Sample size: | up to 10/40 mm Ø |
| Grinding rate/s: | appr. 4 g |
| Grinding speed: | Impeller 10.000 rpm |
Mill KN 295 Knifetec™ - Sample preparation for samples with high fat content
The KN 295 Knifetec™ is designed for the preparation of high fat, high moisture and fibrous samples prior to analysis. The mill is equipped with a grinding chamber cooling feature which enables it to be connected to a cold water tap or other laboratory chilling devices. Samples containing high levels of fat have a tendency to stick to the wall of the chamber as the fat softens during grinding, preventing adequate homogenisation. Fibrous samples may generate heat due to friction. Utilizing the cooling option overcomes both these problems, ensuring satisfactory sample preparation.
Specifications
| Sample: | Oilseeds, prepared foods, meat products, fruit, vegetables, grains, seeds and feed |
| Sample typ: | High-moisture, high-fat and fibrous samples |
| Sample size: | max. 100 ml (50 - 150 g) |
| Grinding time: | 2 - 10 s |
| Grinding speed: | Blade 20.000 rpm |
Homogeniser HM 294™ - Grinding and mixing
The HM 294™ homogeniser are designed for grinding and homogenising of a variety of high moisture, high-fat and fibrous samples. A reproducible degree of homogenisation is achieved by the mixing action obtained by the angled knives. Homogenisation is accomplished through the high speed combined with a powerful cutting action. Angled knife blades produce a vertical flow within the batch and facilitate rapid and thorough homogenization. Complete homogenisation is normally achieved in 20 to 60 seconds.
Specifications
| Sample: | Shredding of green forage and dry food / homogenization of meat, fish, fruit, vegetables |
| Sample typ: | High-moisture, high-fat and fibrous samples |
| Sample size: | 0.1 - 2.5 kg |
| Capacity container: | 3.5 l |
| Grinding speed: | Blade 1.500 rpm |
Homogeniser HM 297™ - Grinding and mixing
The HM 297™ homogeniser are designed for grinding and homogenising of a variety of high moisture, high-fat and fibrous samples. A reproducible degree of homogenisation is achieved by the mixing action obtained by the angled knives. Homogenisation is accomplished through the high speed combined with a powerful cutting action. Angled knife blades produce a vertical flow within the batch and facilitate rapid and thorough homogenization. Complete homogenisation is normally achieved in 20 to 60 seconds.
Specifications
| Sample: | Shredding of green forage and dry food / homogenization of meat, fish, fruit, vegetables |
| Sample typ: | High-moisture, high-fat and fibrous samples |
| Sample size: | 0.1 - 2.5 kg |
| Capacity container: | 5.5 l |
| Grinding speed: | Blade 1.500 rpm |
Hammer mill Hammertec for falling number
Hammer Mill Hammertec is indispensable for sample preparation for falling number. The mill is sturdy and compact and is equipped with a 0.8 mm sieve. New to previously known hammer mills is the greatly reduced noise level, the smaller form with the reduced dead weight.
Specifications
| Power requirements: | 230/110 VAC/50/60 Hz |
| Power consumption: | 1300 W |
| Dimensions (w x h x d): | 55x46x24 cm |
| Weight: | 40.6 kg |
| Hammer speed: | 16800 rpm |
| Safety brake: | yes |
| Noise level: | <80 dB |
