Foss
Hydrotec™ 8000 - fully automated hydrolysis device
The Hydrotec™ 8000 unit performs automated acid hydrolysis of samples to break up bonds between fat and other components. Chemicals are added and removed by pump, improving safety and reducing the risk of human error.
Specifications
Sample: | Processed food and feed samples that contain bound fat |
Parameters: | Hydrolysis, pre step for total fat determination |
Sample size: | 0.5-2.0 g |
Measuring range: | 0.1-100 % fat in combination with extraction |
Hydrolysis time : | typically 2 hours |
Capacity per batch: | 12 samples simultaneously |
Soxtec™ 8000 - fully automatic extraction device
The Soxtec™ 8000 extraction unit is a fully automated system for fast and safe determinations of extractable matter. For total fat analysis, the Hydrocap filter is transferred from the hydrolysis unit to the extraction unit which then performs the four extraction steps boiling, rinsing, solvent recovery and auto shut down, fully unattended.
Specifications
Sample: | Fat in food and feed, extractable matter in textile, paper pulp, plastics, rubber, etc. |
Parameters: | Crude fat, total fat and extractable matter |
Sample size: | 0.5-3.0 g depending on sample type |
Measuring range: | 0.1-100 % |
Extraction time: | 45-60 minutes depending on sample type |
Solvent volume: | 40-110 ml depending on cup type |
Capacity per batch: | 6/12 positions |
Capacity per day: | 42/84 samples |
ST 243™ - semi-automatic extraction device
A three-step, six position solvent extraction system, consisting of an Extraction Unit and a Control Unit. The three-step extraction procedure consists of boiling, rinsing and recovery. Typically solvent recovery is 80%, with only ~10 ml solvent used per sample. Sample preparation prior to GC/HPLC work is also possible using a specially designed seal.
Specifications
Sample: | Fat in food and feed, extractable matter in textile, paper pulp, plastics, rubber, etc. |
Parameters: | Crude fat, total fat and extractable matter |
Thimble size: | 26 x 60 mm (30 ml) |
Measuring range: | 0.1-100 % Fett |
Extraction time: | 40-60 minutes depending on sample type |
Capacity per batch: | 6 positions |
Capacity per day: | 30-36 samples |
ST 245™ - semi-automatic extraction device
A three-step, two positions solvent extraction system that offers the same functions as the ST 243 Soxtec, but with 2 sample positions instead of 6.
Specifications
Sample: | Fat in food and feed, extractable matter in textile, paper pulp, plastics, rubber, etc. |
Parameters: | Crude fat, total fat and extractable matter |
Thimble size: | 33 x 80 mm (65 ml) |
Measuring range: | 0.1-100 % Fett |
Extraction time: | 40-60 minutes depending on sample type |
Capacity per batch: | 2 positions |
Capacity per day: | 10-12 samples |